Creating a Balsa wood plane is a crafting project

Creating a Balsa wood plane is a crafting project which has the enjoyable result of a fun toy which can be played with. While you can purchase kits with all of the parts already cut, you can also create your own balsa wood plane from scratch, needing only the wood, a knife and a plastic nose propeller clip.
Draw a a body piece on the balsa wood sheet, in the shape you wish your plane to be. The plane should be roughly to inches long, and to inches high, with a narrowed nose in front. You must also mark off a notch in the back of the body, a half inch deep and as tall as the width of the sheet (approximately / inch) for the rear fin, and a slot in the center of the body for the wings that is about inches wide.
Draw a rear fin that is about an inch deep, and about to inches wide. If desired, you can taper the rear fin, so it is narrower up front where it enters the body piece, and only reaches the full width in the rear. Mark off a notch, similar to the notch in the body, in the center of the front of the fin.
Draw the wings so that they are as long as the body piece, and as wide as the center slot cut into the body piece. Like the fin, you may choose to taper off the wing slightly, with the widest portion facing backwards.
Use the crafting knife to cut out the pieces of wood you have drawn.
Insert the tail fin into the body of the plane by aligning the notches and pushing the two together. The fin will run perpendicular to the body, with the flat sides running parallel the ground when thrown.
Insert the wings by sliding the wing piece through the slot cut into the body, and centering the wings. If cut properly, it should be a snug fit.
Slide the propeller clip onto the front of your plane and it is ready to throw.
At last, if you want to know more ,you can visit our website blog here: http://www.balsafactory.com/news/.

If you are interested in make a balsa wood plane

Fans of handicraft must be familiar with the balsa wood. It is widely used in making models. If you are interested in make a balsa wood plane, you can read the article belows. Several things you should prepare before getting start the work: balsa wood sheet, pencil, crafting knife and plastic nose propeller clip. All these things can be purchased in a mall. Look carefully step by step and finally you will complete your own balsa wood plane.
Step 1
According to your requirements, draw a body piece of the balsa on on the balsa wood sheet. The plane should be designed with the length between 6 and 8 inches, and height between 1 and 2 inches. In front of the plane, a narrowed nose should be built. Mark off a notch in the back of the body.
Step 2
Mark off a notch in the center of the front of the fin which is similar to the notch in the body you have just made. The rear fin can be tapered depending on your needs to narrow up front. And the rear fin is with the depth of one inch and with about 2 to 3 inches.
Step 3
The wings should be designed as long as the body piece and as wide as the center slot cut into the body piece. You can taper off the wing slightly just like what you have done with the fin. Cut out the pieces of balsa wood according to your design with the crafting knife.
Step 4
Align the notches to insert the tail fin into the balsa body of the plane and push them together. The flat sides should be parallel to the ground when the plane is thrown and the fin should be perpendicular to the body. Slid and center the wing pieces through the slot cut into the body to insert the wings. The balsa wood plane will be ready to throw after sliding the propeller clip onto the front.